The service life of the DLP projector is as long as 20,000+ hours, 10 times longer than the 2,000 hours lifespan of an LCD screen, which means you will save a lot of maintenance costs for replacing your LCD printer's screen.

12W ultra-low operating power is energy-saving and eco-friendly, with about 1/7 energy consumption of LCD printers. Since lower power consumption generates less heat, there is no need for a cooling fan to dissipate heat, reducing print noise below 48 dB.

The Z-axis linear rail is thickened from 15 mm to 20 mm, which effectively reduces the vibration amplitude during Z-axis movement and the layer pattern of printed models for better final print results. Sandblasted surface build plate with strong adhesion to improve the printing success rate.

Three printing modes are optional: static mode and dynamic mode (including smooth and high-speed mode). In dynamic mode, the slicing software will dynamically adjust the printing speed by the cross-sectional size of the printed model to reduce the impact of the release force, thereby improving the printing efficiency. In addition, ELEGOO self-developed a new open-source GOO slicing format, which is compatible with multiple slicing software without restriction.

The USB-powered air purifier with built-in activated carbon can absorb and filter resin odor to create a refreshing printing environment. Or you can choose the upcoming ELEGOO's first large air purifier (247*210*410mm) designed specifically for the photocuring field, which can remove formaldehyde and up to 80% of VOC.